Brand: 3DCPI
Reference: 8300167
Dimafix is a spray tailored for 3D printers with FFF technology and Heated Bed.
It provides great grip between plastic and glass, so warping is not a problem even in large ABS parts. You will be able to print in all kind of thermoplastic materials. While the bed is hot the adhesive effect will be working even in large prints. When the Heated Bed’s temperature goes down the adhesion effect disappears and the model will be easily detached.
Shake it for a few seconds before apply over the base
Make sure the base us cold
Apply it over the base
Wait a few seconds for the surface to dry and heat the bed
Consult the table with recommended temperatures for printing each Dimafix formula
The product begins to work above 65ºC/150ºC
While the bed keeps over 85ºC/185ºF the piece will remain stuck on it
In case of incident during printing try not remove the piece. If the piece has not taking off yet, when bed will be heated again the piece will adhere tightly and maybe you could recover your work.
After printing finished the piece will be easily detached (Below 50ºC/122ºCF)
Wait for the bed to cool down before remove the piece.
If want to clean the bed, the product can be simply removed with a cloth soaked in water
Features:
Strong bond during printing
Suitable for multiple materials
Avoid warping
Once printed, the piece will detached automatically
The product is water soluble
Each bottle allows more than 100 uses
Recommended for printing on heated beds
