Brand: 3DCPI
Reference: 82114
Give a semi-transparent appearance to your prints with this material that combines the properties of PLA PLUS with the ability to let light shine through it. Available in yellow and red to give your pieces an astonishing look.
PLA, Polylactic Acid, is a biodegradable thermoplastic polymer obtained from corn starch, potato, yucca or sugar cane. It is by far the most used material in 3D FDM printing. This material has evolved considerably from its beginnings, to the material we have today, an easy-to-use filament capable of covering most of our needs.
No need to use hot bed.
It requires the use of lacquer on the printing surface.
| Density | 1.14 g/cm³ (23°C) |
|---|---|
| Melting Point | 160°C |
| Elongation | 145% |
| Tolerance | 1.75±0.03 / 3.00±0.05 |
| Speed | 6mm/min |
| First Layer Temperature | 200°C |
| Melt Index | - |
| Decomposition Temperature | 230°C |
| Recommended Printing Temperature | 200±10°C |
| Distortion Temperature | 70°C |
| Hot Bed Temperature | 60°C |
