Brand: 3DCPI
Reference: 8281
With a printing temperature of 240 ± 10 ºC, the PETG has come to stay. It's a filament that offers all the printing facilities with incredible mechanical properties.
The PETG, polyethylene glycol terephthalate, is ideal for printing pieces that are very resistant to breakage and have a very smooth and uniform surface finish.
It provides very strong printed parts with a high adhesion between layers, which means that the printed parts are much more resistant between layers and the breaks will not occur along a layer, if not throughout the piece.
-Resist the attack of different chemical agents.
-It does not absorb water.
-Low shrinkage (no warping or break between layers)
-You need to use warm bedding.
-It is necessary to use lacquers for 3D printing
-Exceptional hardness and high resistance to impact
-Liquidity
-High mechanical resistance and excellent flexibility
-High Transparency
-Glossy
-Recyclable
-It is a material that we recommend to test without a doubt.
| Density | 1.27 g/cm³ (23°C) |
|---|---|
| Recommended printing temperature | 230±10°C |
| Distortion temperature | 80°C |
| Melting point | 200°C |
| Hot bed temperature | 0°C - 80°C |
| Tolerance | 1.75±0.03 / 3.00±0.05 |
| Melting index | - |
| Impact resistance | 50kg- cm/cm |
| Decomposition temperature | 280°C |
| Elongation | 140% |
